Books (4)
- 1. Md. Jahidul Haque, and M.S. Rahman; "Bio degradation of Industrial Materials", Handbook of Biodegradable Materials, pp 1407-1448, Springer Publisher, Online ISSBN:978-3-031-09710-2, First Online, 21 Feb.2023., 2023
- 2. Md. Jahidul Haque, Zahidul Islam, Ahmed Sidrat Rahman Ayon, Akib Jabed, Zarin Rafa Shaitee, Sanzana Tabassum Proma, Mst. Esmotara Begum, M. Humayan Kabir, M. Mintu Page 7 of 12 Ali, M. Abdul Kaiyum, and M. S. Rahman; "Usage of Bionanomaterials in Production of Solar Energy", Apple Academic Press & CRC Press (Tailor & Francis Group), ISBN: 9781774912010, 2022
- 3. Md. Jahidul Haque, Ahsan Habib Munna, Ahmed Sidrat Rahman Ayon, Zarin Rafa Shaitee, Sanzana Tabassum Proma, Sadia Akter, Tasnuva Humaira, Humayan Kabir, Mintu Ali, Abdul Kaiyum, and Shamimur Rahman; "Advanced Nanomaterials for Dentistry, Sustainable Nanomaterials for Biosystem Engineering Impacts, Challenges, and Future Prospects", Apple Academic Press & CRC Press (Tailor & Francis Group), ISBN: 9781774910665, 2022
- 4. Abdullah Al Mahmood and Shamimur Rahman; "Ceramic Raw Materials - Different Clays", LAP LAMBERT Academic Publishing, ISBN-13: 978-3-330-05396-0, ISBN-10: 3330053968, EAN: 9783330053960, 2017
Journal Articles (23)
- 1. M. Humayan Kabir, Munjar Hafiz, Suhanur Rahman, Md. Saifur Rahman, Habibur Rahman, M. M. Rashid, Md. Faruk Hossain, M. Mintu Ali, M. Jahidul Haque, M. K. R. Khan & M. S. Rahman; "Effect of Ga doping on structural, morphological, optical and electrical properties of CuO thin films deposited by spray pyrolysis technique", Mater Sci: Mater Electron 34, 1258 (2023), 2023
- 2. M.F.I. Al Imam, R.A. Beg, M.J. Haque, M.S. Rahman; "Effect of novel phase change material (PCM) encapsulated design on thermal performance of solar collector", Results in Materials, Elsevier, Volume 18, June 2023, 100388, 2023
- 3. M Humayan Kabir, Munjar Hafiz, Shamima Akhter Urmi, M Jahidul Haque, M Mintu Ali, Md Saifur Rahman, MKR Khan, M S Rahman; "Effect of Ga doping on microstructure, morphology, optical and electrical properties of spray deposited CdO thin films", Optical Materials Volume 125, March 2022, 112123, 2022
- 4. M. Humayan Kabir, Antara Bhattacharjee, M. Manjorul Islam, M. S. Rahman, Md. Saifur Rahman & M. K. R. Khan; "Effect of Sr doping on structural, morphological, optical and electrical properties of spray pyrolized CdO thin films", Journal of Materials Science: Materials in Electronics volume 32, pages 3834–3842, 2021
- 5. M. Mintu Ali, Md. Jahidul Haque, M. Humayan Kabir, M. Abdul Kaiyum and M. S. Rahman; "Nano synthesis of ZnO–TiO2 composites by sol-gel method and evaluation of their antibacterial, optical and photocatalytic activities", Results in Materials Volume (Elsevier), Vol. 11, 100199, 2021
- 6. M. Golam Mortuza Nion, M. Humayan Kabir, Marjanun Akter Mona, M. Jahidul Haque, Nayem Shahariar, Munjar Hafiz, M. S. Rahman; "Effect of Al doping on morphology and optical properties of spray pyrolized MgO thin films", Results in Materials Volume (Elsevier), Vol. 12, 100199, 2021
- 7. M. Abdul Kaiyum, M. Humayan Kabir, Md. Mintu Ali, M. Shamimur Rahman; "Effects of Iron Doping on Properties of TiO2 Thin Film Prepared by Spin Coating Method", Journal of Surface Investigation X-ray Synchrotron and Neutron Techniques 15(6):1225-1231, 2021
- 8. Golam Mowla, Nabid Hossain, M. Humayan Kabir, M. Jahidul Haque, M. Mintu Ali, M. Abdul Kaiyum, M. S. Rahman; "Structural, electrical, and magnetic characterization of (1-x)BaTiO3-xNi0.6Zn0.4Fe2O4 multiferroic ceramic composites", Materials Engineering Research, Vol. 3, Issue 1, 2021
- 9. M. Mintu Ali, M Nion, M S Rahman; "Effects of Binder on Physical and Mechanical Properties on Unglazed Ceramic Tiles", Journal of Engineering and Applied Science Vol. 4, No. 1, pp. 42–51, 2020
- 10. M Humayan Kabir, M Mintu Ali, M Abdul Kaiyum and M S Rahman; "Effect of annealing temperature on structural morphological and optical properties of spray pyrolized Al-doped ZnO thin films", Journal of Physics Communications 3 (10), 105007, 2019
- 11. M.A. Kaiyum; S. Rahman; "Investigation of Physical Properties of Locally (Rajshahi, Bangladesh) Available Clay", Journal of Advances in Geotechnical Engineering: 2 pp. 1-5 (3), 2019
- 12. Tasmia Zaman, Md Khairul Islam, Md Abdur Rahman, Arman Hussain, Md Abdul Matin, Md Shamimur Rahman; "Mono and co-substitution of Sr2+ and Ca2+ on the structural, electrical and optical properties of barium titanate ceramics", Ceramics International Volume 45, Issue 8, 1 June 2019, Pages 10154-10162, 2019
- 13. M.Humayan Kabir, M.Al amin, M.S.Rahman and M.K.R.Khan; "Influence of Al doping on microstructure, morphology, optical and photoluminescence properties of pyrolytic ZnO thin films prepared in an ambient atmosphere", Chinese journal of physics 56 (5), 2275-2284), 2018
- 14. T. Zaman, Mst. S. Mostari, Md. A. Al Mahmood, Md. S. Rahman; "Evolution and characterization of eggshell as a potential candidate of raw material", Ceramica 64(370):236-241, 2018
- 15. Shamimur Rahman, Abdullah Al Mahmood; "Solution for Raw Material Crisis in Bricks and Tiles Manufacturing Industries", International Journal of Latest Trends in Engineering and Technology, Vol. 8, No. 2, 2017, pp. 120-127, 2017
- 16. Md. Shamimur Rahman, Md. Abdul Kaiyum, Md. Aminul Islam; "Effect of Al Doping on Thickness, Optical, Morphological and Structural Properties of TiO2 Thin Film Prepared by Spin Coating Method", Journal of Thin Films Research, Volume 1,Issue 1,2017 Pages 17-19, 2017
- 17. 2. Abdullah Al Mahmood, Shamimur Rahman, Omar Faruque, Tanmoy Kishor; "Comparative Analysis of Ceramic Product Manufactured from Traditional Raw Materials and Local Raw Materials in Bangladesh", Engineering International, ISSN: 2409 -3629, Volume: 04 No.01, Dec -2016, pp. 41-48, 2016
- 18. 2. Abdullah Al Mahmood, Shamimur Rahman, Omar Faruque, Tanmoy Kishor; "Comparative Analysis of Ceramic Product Manufactured from Traditional Raw Materials and Local Raw Materials in Bangladesh", Engineering International, ISSN: 2409 -3629, Volume: 04 No.01, Dec -2016, pp. 41-48, 2016
- 19. Md. Shamimur Rahman and Md. Abdullah Al Mahmood; "Crack initiation and fatigue behaviour evaluation of ceramic film deposited on Ti-6Al-4V alloy", International Journal of Materials Science and Applications (IJMSA), USA, Vol. 3, No. 5, 2014, pp. 246-249, 2014
- 20. Md. Shamimur Rahman and Md. Abdullah Al Mahmood; "Effect of substrate bias voltage on fretting fatigue behaviour of ceramic film deposited on Ti-6Al-4V alloy", International Journal of Materials Science and Applications (IJMSA), USA, Vol. 3, No. 5, 2014, pp. 250-253, 2014
- 21. M.S. Rahman, S. Tanimoto, D Yonekura and R. Murakami; "Influence of the Substrate Bias Voltage on Fretting Fatigue Behavior of CrN film Deposited on Ti-6Al-4V Alloy", International Journal of Modern Physics B, Vol. 25, issue 12, pp. 1567-1576, 2011
- 22. Md. Shamimur Rahman, Takeshi Katsuma, Daisuke Yonekura, Ri-ichi Murakami; "Evaluation of Crack Initiation and Fatigue Behavior of CrN film Deposited on Ti-6Al-4V Alloy", International Journal of Modern Physics B, Vol. 24, Issue15-16(2010), pp. 2502-2506, 2010
- 23. Md. Shamimur Rahman, Daisuke Yonekura, Takeshi Katsuma, and Ri-ichi Murakami; "Effect of Bias Voltage on Fatigue Behavior of CrN Film Deposited on Ti-6Al-4V Alloy", MSEC_ICM&P2008-72441, pp. 169-174;, 2009
Conference Papers (24)
- 1. M. Mintu Ali, Md. Jahidul Haque, Md. Zahurul Islam, M S Rahman; "A Prospective Review on Dense and High Ionic Conductivity of LSGM Electrolytes Sintered at Lower Temperature through Different Routes", 4th International Conference on Physics for Sustainable Development and Technology (ICPSDT-2022), 2022
- 2. M. Mintu Ali, Md. Jahidul Haque, Subhro Roy, Md. Nafiul Islam Sarker, Ariful Bari Rifat, Showvik Saha, M. Humayan Kabir, M S Rahman; "A Comprehensive Review Regarding the Technological Development of ZnO Thin Films From 2018 To 2021", 4th International Conference on Physics for Sustainable Development and Technology (ICPSDT-2022), 2022
- 3. Shamima Akther Urmi , G. M. Sadrul Islam, Mainul Islam , M. S. Rahman; "Manufacturing & Characterization of Glass Samples with Three Different Sources of Silica: Possible Alternatives for Quartz in Glass Manufacturing", International Conference on Materials, Energy, Environment and Engineering (ICMEEE), 2020
- 4. ] Md. Mintu Ali, B.A.Johan, M. Shohan Ali, M. Humayan Kabir, M.A. Kaiyum, M. Khairul Islam, M. S Rahman; "Physio-Mechanical behavior of different types of local and imported clays as a raw material used in traditional ceramic body preparation", International Conference on Materials, Energy, Environment and Engineering (ICMEEE), 2020
- 5. M.Humayan Kabir, M N A Chowdhury and M.S.Rahman; "Effect of Annealing on Physio-Optical Properties of ZnO Thin Films Prepared by Spray Pyrolysis Technique", 5th International Conference on Engineering Research, Innovation and Education (ICERIE 2019), 2019
- 6. Md. Shamimur Rahman, Md. Abdul Kaiyum, Md. Mintu Ali; "Enhancement of Fatigue Behavior of PVD Coated Ceramic Thin Film Deposited on Titanium Alloy", International Conference on Mechanical, Industrial and Materials Engineering (ICMIME2019) 17-19 December, 2019, RUET, Rajshahi, Bangladesh, 2019
- 7. M. A. A. Mahmood, T. Zaman, M. S. Rahman and M. J. Abedin; "Using Analytical Hierarchy Process for Optimization of Gas Metal Arc Welding (GMAW) Parameters", International Conference on Mechanical Engineering and Renewable Energy (ICMERE-2014), 2014
- 8. Md. Forhad Ibne Al Imam, Md. Shamimur Rahman, Md. Abdullah Al Mahmood; "Influence of Heat Treatment on Fatigue and Fracture Behavior of Aluminium Alloys", International Conference on Engineering Research, Innovation and Education (ICERIE 2013), 2013
- 9. M. S. Rahman, M. A. A. Mahmood, T. Zaman, and M. J. Abedin; "Optimization of Process Parameters in MIG Welding by Using Analytical Hierarchy Process", International Conference on Mechanical Engineering and Renewable Energy (ICMERE 2013), 2013
- 10. M. S. Rahman, M. A. A. Mahmood, and T. Zaman; "Potential Use of the Clay from the Dead River Isamati", International Conference on Climate Change Impact and Adaptation (I3CIA) Center for Climate Change and Sustainability Research (3CSR), 2013
- 11. M. A. A. Mahmood, M. S. Rahman, T. Zaman, and M. B. Islam; "Ceramics in Bangladesh: Recent Evolution and Future Prospect", International Conference on Mechanical, Industrial and Materials Engineering 2013 (ICMIME2013), 2013
- 12. M. A. A. Mahmood, M. S. Rahman, T. Zaman; "Comparison of Welding Effect on Tensile Strength and Hardness of Mild Steel and Cast Iron", International Conference on Mechanical, Industrial and Materials Engineering 2013 (ICMIME2013), 2013
- 13. M. A. A. Mahmood, M. S. Rahman and Tasmia Zaman; "Ceramics in Bangladesh: Its Recent Evolution and Future Prospect", International Conference on Mechanical, Industrial and Materials Engineering (ICMIME-2013), 2013
- 14. Md. Forhad Ibne Al Imam, Md. Shamimur Rahman and Md. Abdullah Al Mahmood; "Influence of Heat treatment on Fatigue and Fracture Behavior of Aluminum Alloys", International Conference on Engineering Research, Innovation and Education (ICERIE-2013), 2013
- 15. Md. Forhad Ibne Al Imam, Md. Shamimur Rahman and Md. Abdullah Al Mahmood; "Influence of Heat treatment on Fatigue and Fracture Behavior of Aluminum Alloys", International Conference on Engineering Research, Innovation and Education (ICERIE-2013), 2013
- 16. M. Shamimur Rahman, M. Rafiqul Alam Beg, and M. Nurun Nabi; "Emission Characteristics of a DI Diesel Engine with Bio-fuel", International Conference on Mechanical Engineering' 2005, (ICME2005) 28-30 December 2005, Dhaka, 2005
- 17. M. Shamimur Rahman, M. Rafiqul Alam Beg, and M. Nurun Nabi; "Investigation of Exhaust Emission of a DI Diesel Engine with Biodiesel", 5th International Mechanical Engineering Conference and 10th Annual Paper Meet, 2004
- 18. M.S Rahman, M.N. Nabi, and M.R.A. Beg; "Performance Study of A Diesel Engine with Diesel-Vegetable Oil Blends as Alternative Fuel", 2nd BSME-ASME International conference on Thermal Engineering, 2-4 January, 2004, Dhaka, 2004
- 19. M.S Rahman, M.R.A. Beg, and M.N. Nabi; "Performance Study of A Diesel Engine with Esterified Vegetable Oil", 4th International Mechanical Engineering Conference and 9th Annual Paper Meet, 29-31 December, 2004, Dhaka, Bangladesh, 2004
- 20. Md. Nurun Nabi, Mhia Md. Zaglul Shahadat , Md. Shamimur Rahman, and Mohd. Rafiqul Alam Beg; "Behavior of Diesel Combustion and Exhaust Emission with Neat Diesel Fuel and Diesel-Biodiesel Blends", SAE International conference, October 27-31, 2004 Paper No. 2004-01-3034, pp. 1-8. USA, 2004
- 21. Nurun Nabi, Shamimur Rahman, and Rafiqul Alam Beg; "Fundamental Properties of Different Vegetable Oils Available in Bangladesh", SAE International conference, Pittsburgh, Pennsylvania USA, October 27-30, 2003, 2003
- 22. Md. Nurun Nabi, Md. Shamimur Rahman, Mohd. Rafiqul Alam Beg, Md. Sakhawat Hossain, and Md. Sazzadul Faruki; "Characterization of Different Vegetable Oils Available in Bangladesh", 3rd International Conference of Mechanical Engineers (ICME) and 8th Annual Paper Meet, 20-22 March, 2003, Dhaka. Paper no. 10, pp. 67-76, 2003
- 23. Murari Mohon Roy and Md. Shamimur Rahman; "Improvement in Odor Assessment procedure in DI Diesel Engines", International conference on Thermal Engineering, 31 December, 2001-2 January 2002, Dhaka, Bangladesh. pp. 544-551, 2002
- 24. R.A. Beg, M.S. Rahman, P.K. Bose, and B.B. Ghosh; "Performance Studies on Semi-Adiabatic Diesel Engine Using Vegetable Oil as Fuel", SAE International conference, San Diego, California USA, October 21-24, 2002. Paper no. 2002-01-2692, 2002